 |
Exterior
Walls, Columns and Headers
-
Pre painted with a baked on polyester finish that has a 30-Year
Warranty. Exterior wall panels are 26 gauge Galvanized steel,
with 1 1/4" deep vertical ribs, 12" on center. |
 |
Interior
Partitions
-
Vertically installed with interlocking joints. Since these partitions
are non-load bearing, they can be moved. This allows adjustments
to unit dimensions. Protective "screw guard" channels
run along the top and bottom of the partitions, eliminating "snag"
points that can be a major source of liability. Partitions are made
of 28 gauge acrylic coated Galvanized steel, 30" wide panels
with 1 1/4" rib height.
20-Year Warranty. |
 |
Roof
Panels
-
The standing seam configuration attaches with concealed clips and
extended life, stainless steel self-drilling fasteners. All panels
carry a 25-Year Warranty. Made of 22
or 24 gauge Galvalume steel.
A available in 16" widths and 3" rib heights, and has
two secondary ribs. Roof pitch: 1/4:12 through 4:12. |
 |
Doors
-
Come complete with coil springs, brackets, door stops, slide latches
and hardware. Manufactured of 26 gauge pre painted galvanized steel.
Interior doors are available in both swing and roll-up type. Interior
swing doors are of corrugated 26 gauge. Available in multiple colors.
All roll-up doors come with a 2-Year Warranty.
|
 |
Trim
& Downspout
-
Pre painted with a baked-on polyester finish with a 30-Year Warranty.
New gutter design introduced in the year 2000. Fabricated from 26
gauge Galvanized steel. |
